Loading... Please wait...

The #1 Source For Your Pro Audio,Video and Broadcast Requirements

Categories

Our Newsletter


Hall Research UHBX-P2 HDMI over UTP Extender with HDBaseT and PoH (Sen

Price:
$711.55
SKU:
HRT-UHBX-P2

Shipping:
Calculated at checkout

Other Details

Important Notice:
Normal Delivery Time 2 - 7 Business Days



Product Description

Hall Research UHBX-P2 HDMI over UTP Extender with HDBaseT and PoH (Sender + Receiver) HRT-UHBX-P2

UHBX-P2 is an extender kit ( combination of UHBX-S-PD + UHBX-R-PSE ) from Hall Research that utilizes HDBaseT technology. It can send HDMI, IR, bi-directional RS-232, and PoH (Power-over-HDBaseT) to 500 ft (150 m) on a single Cat6 cable. The extender uses only one +5v power supply, internally creates 48v PoH and complies with IEEE 802.3af handshake. The P2 extender's receiver unit provides power to the sender. In standard mode the UHBX-P2 supports DVI and HDMI signals of virtually any resolution up to 4K x 2K to 330 ft (100m), and in Long Reach mode it supports resolutions to 1920x1080 to 500 ft (150 m). The devices are housed in compact and sturdy metal enclosures and have convenient mounting provisions. They are designed and manufactured in the USA. The end identified as PSE (power sourcing equipment) injects power on to the Cat6 cable and the side identified as PD (powered device) is powered through the Cat6 cable. The PSE side requires connection of an AC adapter that supplies 5v DC, while the PD side is simply powered through the RJ45 connector from the opposite side.

Full-duplex RS232 Serial Port extension is provided that can operate at any baud rate to 115,200 (independent of video activity). The extender can also extend IR from one end to the other. IR Detector and IR Emitter cables are sold separately. The IR extension preserves the modulation(carrier) frequency and provides compatibility to virtually any standard. It supports modulation range from 30 KHz to 60 KHz.

Two user selectable distance modes are available: Standard(default) and Long Reach. If the length of UTP cable is less than 100 meters (330 ft), then STD mode should be used. For the lengths above 330 ft Long Reach (L.R.) mode must be set. Long Reach setting can extend maximum of 1080p@60 Hz, 8-bit color (does not support deep-color or 4Kx2K) , RS232, IR and Power up to 500ft (150m).

Features:

  • Extends HDMI or DVI video to 500 ft on just one Cat6
  • Includes RS232 and IR extension in both directions
  • Supports virtually all HDMI and DVI resolutions including 4Kx2K
  • Only one end requires power, other side is powered via UTP
  • Power-over-HDBaseT meets IEEE 802.3af standard
  • Sturdy metal enclosures with mounting provisions
  • Complies fully with HDBaseT standard
  • Runs from just one +5vDC supply
  • RS232 Supports all baud rates regardless of presence of video
  • IR extension is carrier frequency agnostic and supports 30 KHz to 60 KHz modulation to provide compatibility across all IR standards
  • Fully isolates ground between TX and RX sides
  • Compact, Rugged, Reliable, and Economical
  • Made in USA

Specifications:

  • Max Distance:
  • - Standard Mode (STD): 330 ft (100m)
  • - Long Reach Mode (LR) : 500 ft (150m)
  • Video Standards: DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including 12 bit color depth, 3D video and 4K support)
  • Signal Type: TMDS
  • Connectors: Locking HDMI
  • Video Resolutions:
  • - DVI: VGA (640x480) to WUXGA (1920x1200)
  • - HDTV: 480i to 1080p
  • - Digital Cinema: 4K (4096x2160)
  • Audio Formats: All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio (32-192kHz sample rate)
  • DDC: Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP handshake
  • CEC: Pass-Thru DDC for Consumer Electronics Control compatible devices
  • RS232: Bi-directional (full-duplex) any baud rate upto 115,200
  • IR: Extended in both directions. Carrier modulation range from 30 KHz to 60 KHz
  • PoH: Power-over-HDBaseT meets IEEE 802.3af standard. PD side identifies as Class 2 (3.84-6.49 watts). Actual power consumption of PD side is 5.5 watts max
  • Power Supply:
  • - 100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 3.2 A, regulated
  • - Actual DC current (powering both -PSE


Other Details

Important Notice:
Normal Delivery Time 2 - 7 Business Days

Find Similar Products by Category


Add to Wish List

Click the button below to add the Hall Research UHBX-P2 HDMI over UTP Extender with HDBaseT and PoH (Sen to your wish list.

You Recently Viewed...