Price:> $1,733.00
MuxLab 500730 6G-SDI Extender Over UTP
The 6G-SDI Extender is a unique new solution from Muxlab for extending SDI based cameras* or other SDI sources* up to 4K/30hz resolution with the added benefit of extending the Hi Resolution signal up to 330 feet (100M) using HDBaseT technology.Standard Cat5e/6 UTP cable is used for the extension. The pair of units (Transmitter, Receiver) use PoE for power and only require the Receiver (Rx) side to be powered. The input source for the 6G-SDI Extender is HD-SDI using four coax cables, 3G-SDI using two coax cables, and 6G-SDI using a single coax cable.Features:Up to 330 feet (100m) using HDBaseT technologyHD-SDI using single, two or four coax cables, 3G-SDI using single or two coax cables, 6G-SDI using a single coax cableMaximum resolution supported: 4K/30Supported modes: SMPTE 292M, SMPTE 296M, SMPTE 372M, SMPTE 424M, SMPTE 425MSupports all 6G channel configurations (1/2/4)Automatic SDI Link recognition and configurationUSB interface for field upgradable firmware and diagnosticsPoE to power supply to the Transmitter (Tx)Ethercon Connectivity and Aluminum Enclosure for ruggedized useSpecifications:Environment: 6G-SDI digital signal transmissionEnclosure: Metal box, approx. 5.6"x4"x1" (RX) / 4.3" x 4.3" x 1" (TX)Color: BlackControl: Serial console emulation with USB interfaceFront panel (RX): Mini USB for firmware updates status LEDSRear panel (RX):+48 V power jackBNC for SYNC input signalRJ45 for UTP cable between RX and TX unit4x BNC, SDI output connectorsFront panel (TX):BNC for SYNC output signal4x BNC SDI output connectorsRear panel (TX): RJ45 for UTP cable between RX and TX unitTop panel (TX): Mini USB for firmware updates status LEDSConnectors (SDI in): 4 BNC connector for SDI input ( 0.8V pp, 75 ohm )Connectors (SDI out): 4 BNC connector for SDI output ( 0.8V pp, 75 ohm )Connectors (sync): 2 BNC connectorsConnectors (control): Mini USB, for configuration and firmware updatesConnectors (UTP ): RJ45 / Ethercon, for UTP communicationConnectors - power: One standard 2.1mm power jackCompliance: FCC, CE, RoHSPower: 48V external power supply with US, UK and Euro blades
The 6G-SDI Extender is a unique new solution from Muxlab for extending SDI based cameras* or other SDI sources* up to 4K/30hz resolution with the added benefit of extending the Hi Resolution signal up to 330 feet (100M) using HDBaseT technology.
Standard Cat5e/6 UTP cable is used for the extension. The pair of units (Transmitter, Receiver) use PoE for power and only require the Receiver (Rx) side to be powered. The input source for the 6G-SDI Extender is HD-SDI using four coax cables, 3G-SDI using two coax cables, and 6G-SDI using a single coax cable.
Features:
Specifications: