Loading... Please wait...

The #1 Source For Your Pro Audio,Video and Broadcast Requirements


Our Newsletter

Cobalt 9904-UDX-4K-IP Next-Generation Advanced openGear Scaler and Frame Synchronizer Card 9904-UDX-4K-IP


Calculated at checkout

Product Description

Cobalt 9904-UDX-4K-IP Next-Generation Advanced openGear Scaler and Frame Synchronizer Card 9904-UDX-4K-IP

The 9904-UDX-4K-IP from Cobalt simplifies the upgrade of HD and UHD systems, enables ongoing use of existing content libraries, and provides features such as professional Technicolor HDR Intelligent Tone Management (ITM) that are essential in next-generation production and ATSC 3.0 broadcasting applications.

Using the 9904-UDX-4K-IP with HDR ITM, Cobalt customers can upgrade their existing HD (720p/1080i/1080p) and UHD (2160p) SDR (Standard Dynamic Range) infrastructure - cameras, switchers, servers, etc. to new HD and UHD HDR systems and workflows. In addition to adding value and longevity to existing systems, an HDR ITM-enabled 9904-UDX-4K-IP can breathe new life and revenue into HD and UHD content, allowing media companies to archive and repurpose their thousands of hours of such material for HDR distribution.

The 9904-UDX-4K-IP not only upconverts 6G/3G/HD/SD-SDI to either UHD1 3840 x 2160 Square Division (SDQS) or Two Sample Interleave (2SI) quad 3G-SDI-based formats, but also outputs SMPTE ST 2082 12G-SDI signals for single-wire 4K transport. With its 12G-SDI and quad 3G-SDI inputs, the unit can also perform the reverse processes in downconverter mode. Four bidirectional AES ports support embedding and de-embedding. The 9904-UDX-4K-IP features dual 10GigE Ethernet ports that support emerging uncompressed video/audio/data over IP standards including AES67, SMPTE ST 2022-6, and SMPTE ST 2110. The 9904-UDX-4K-IP also features optional 3D-LUT conversion and supports third-party Wowow and Pomfort color-grading software GUIs.

Please note: Card only! Rear module and openGear frame sold seperately.


  • High-density openGear comprehensive UHD UDX solution
  • Full up/down conversion between HD/3G, ST 2082 12G-SDI single-wire, and SDM/2SI quad 3G-SDI based formats, with ST 2082 12G-SDI single-wire and quad 3G UHD available at both input and output
  • Supports Square Division Multiplex (SDM) and Two-Sample Interleave (2SI) quad UHD formats
  • 12G-SDI and quad 3G frame sync and user delay
  • Supports SNMP and Cobalt's Reflex (JSON) Protocols
  • Full embedded audio processing with user delay offset and AES I/O
  • Noise Reduction and Detail Enhancement provide image quality optimization
  • Remote control/monitoring via Dashboard™ software, OGCP-9000 remote control panels, integrated HTML5 web interface, SNMP, or Cobalt's RESTful-based Reflex protocol
  • Five year warranty


  • Max offset: 20 frames
  • Latency (min): 1 frame
  • Bulk delay control: -33 msec to +3000 msec.
  • Per-channel delay controls: -800 msec to +800 msec
  • HDMI 2.0 Output: type A standard connector
  • IP ST 2022-6 Interface: (2) 10GigE multi-mode optical Tx/Rx interface; female LC duplex connectors
  • Frame Reference Input: (2) reference from frame bus. SMPTE 170M/318M Black Burst, SMPTE 274M/296M Tri-Level

Find Similar Products by Category